<menuitem id="brtlb"></menuitem><menuitem id="brtlb"><strike id="brtlb"><listing id="brtlb"></listing></strike></menuitem>
<var id="brtlb"></var><var id="brtlb"></var><var id="brtlb"><dl id="brtlb"><progress id="brtlb"></progress></dl></var>
<var id="brtlb"></var>
<menuitem id="brtlb"><dl id="brtlb"></dl></menuitem>
<cite id="brtlb"></cite>
<var id="brtlb"><ruby id="brtlb"></ruby></var>
主頁 > English > Saar products > Saar die steel display >
Saer products
Saar die steel display
  Thrall is the market leader in providing integrated solutions for mold and steel products that meet the needs of the industry.
    
Therefore, we are your preferred partner to provide you with excellent quality tooling steel and cost-effective products.
Specialized components. In the face of growing market demand for processing performance, Germany Saar has the ability to provide better environment, product functions and health.
We are proud of the high quality steel products and solutions. In view of our extensive product mix, it is no exaggeration to say that our flag is
At least one product is suitable for casual industrial use or engineering application. In addition, we continue to promote and deepen our product plan to meet the new moon.
Different needs and needs. According to the wide application category of the German sahr die steel performance comparison table, suitable hot working, plastic forming, cold working and powder selection are selected.
The best mould for metallurgy has a steel solution.


download

 

 

Saarschmiede-1.2311

Low sulphur die steel can be adjusted by heat treatment. It is preferable if the die is finished by spark etching or photochemical processing or high polish. It can be used to make plastic moulds below 400MM

 

download

Saarschmiede-1.2312

The special steel with high machinability is suitable for die set of die casting machine. It can be adjusted by heat treatment. download

 

 

Saarschmiede-1.2738

The hardness of pre hardened plastic mold steel is 30-34 HRC or 34-38HRC under delivery. Characteristics: good machinability and polishing, and suitable for drying. Because of the increase of nickel content of about 1%, it has excellent quench resistance. Because of the above characteristics, it is suitable for large plastic moulds which require deep processing and strong impact on the core.

 

 

download

 

 

Saarschmiede-1.273802

"· MFR x 5 Sonder is especially suitable for large parts (such as pressure die and / or injection mold) · good polishing; good weldability; and can nitride · hardness from the surface to the center part is very uniform · prehardened to 310-350HB or MFR x 5 Sonder (HQ) according to customer requirements is produced through VAR (vacuum arc remelting) The product achieves high purity and extremely low segregation, so it has excellent performance in polishing and basking."

 

   

download

 

saarschmiede_1.2711

Chromium nickel molybdenum alloy die steel with high strength and high strength and high toughness. It is suitable for higher mechanical and thermal requirements. It is usually delivered in a pre hardened state with a hardness of about 36-40HRC; it can also be delivered in other hardness or annealing conditions.。

 

download

 

 

 

Saarschmiede-1.2714

Load resistant die steel with high hardened depth and high wear resistance at high temperature. Delivery status: the recommended strength is 1000 to 1400 N/mm2 (followed by 1600 N/mm2 heat treatment by customers). It is especially suitable for all sizes of the die and all types of press die for hard steel and forging machine tools, as well as all types of cavities, as well as the punch and die for making bolts, nuts, rivets, die milling cutters and hot cutting edges. It is suitable for processing light and heavy metals of bar and pipe extrusion rod, backing plate, die cushion and steel die for medium heat stress. It is recommended that the preheating temperature of the hot working die is 250 - 300 degrees C.

 

  

 

download

 

 

 

Saarschmiede-1.2083

"High chromium alloy tool steel with good corrosion resistance, Gao Jie clarity and especially suitable for polishing. Because of these properties, they are suitable for processing corrosive plastic materials, such as PVC. Characteristics: exceptionally high spin rotation, good hardenability, good dimensional stability and corrosion resistance when hardened. Water, steam, organic acids, nitric acid, carbonate and similar media. The surface can be highly corrosion-resistant after the mirror is polished. The products of VAR (vacuum arc remelting) or ESR (electroslag remelting) have very high purity and uniform microstructure, so they have high polishing and very stable mechanical and physical properties.。"

 

 

 

download

 

 

 

 

Saarschmiede-1.2316

"High chromium molybdenum alloy special steel with the highest corrosion resistance, suitable for plastic moulds, usually used for injection moulds of corrosive plastic parts (PVC). BP 42 is delivered in quenching and tempering state, and the tensile strength is about 1000N/mm2 (about 100kp/mm2). Its surface can be treated by mirror polishing, so it is suitable for manufacturing moulds with high surface quality. After VAR (vacuum arc remelting) or ESR (electroslag remelting) BP42 (HQ), it has very high purity and uniform microstructure, so it has very high polishing and very stable mechanical and physical properties. BP 42 is delivered with hard rod or forged material. The surface quality can be improved by gas nitriding or salt bath. The customers do not need further heat treatment. Quenching will not cause dimensional change or deformation. Under special circumstances, BP 42 can also be delivered in annealing state if the tensile property is higher than the above delivery state. In this case, because of its lower hardness, the machinability is higher, but the heat treatment must be done according to the following values.。

 

  

 

 

download

 

 

 

 

 

Saarschmiede-1.2343

"Thermally processed Cr Mo alloy steel with good high temperature strength and high toughness at high temperature. Because of heat-resistant fatigue and easy to quench, RDC 2 is especially suitable for processing light alloy, such as lining, mold, heart shaft, pressure washer, valve rod, joint, automatic center shaft and shear shaft extrusion die. It is also suitable for die casting die, core and demoulding device for processing light alloy, slider, plunger, reverse plunger, and spray. The nozzle, mold lining, gate, bracing, die mold, die lining, punch and shaft of the forging machine, and die and punch for making bolts, nuts and rivets. RDC 2 can be cooled with water. It can also be used in the manufacture of plastic moulds. RDC2 (MultiblocHQ) is a product of ESR (electroslag remelting) and Micro900BG Technology (our special forging and heat treatment process). The product has high impact resistance and no direction, while the mechanical and physical properties are very uniform. In addition, extremely high purity makes the steel have excellent polishing properties. Hot working and heat treatment forging 1150 - 850 degrees C (2100 "")

 

 

 

 

 

download

 

 

 

 

 

Saarschmiede-1.2344

"Hot worked chromium molybdenum alloy steel with high wear resistance and high temperature strength under high temperature. The hardenability is very good. It is used as extrusion die for light alloy, such as mandrel, pressure washer, coupling box, automatic centring shaft and shearing shaft, mould and liner. It also applies to die casting die, core and demoulding device for light alloy. Punches and mandrel for dies, die liners and forging machines, and tools and punches for bolts, nuts and rivets. RDC 2V is also suitable for the manufacture of plastic moulds. It is especially suitable for liquid nitriding (Tenifer treatment) and can be cooled by water. It is recommended that the preheating temperature of the hot working die is 250 - 350 degrees C. RDC2V (MultiblocHQ) is a product of ESR (electroslag remelting) and Micro900BG Technology (our special forging and heat treatment process). The product has high impact resistance and no direction, while the mechanical and physical properties are very uniform. In addition, extremely high purity makes the steel have excellent polishing properties."

 

 

  

 

 

 

download

 

Contact Us

We firmly believe that "brand" is not only a trademark, one product, but also a quality. It is a quality that maintains the trust of the consumer to the enterprise by good quality.

  • E-mail
    sales@hnbosa.com
  • Contact number
    0731-83307771
  • Contact address
    3, 6 Dingsheng Road, Liuyang hi tech Industrial Development Zone, Hunan

NAME:*
TEL:*
MESSAGE:*
@ HuNan BOSA mouldsteel.Co .,Ltd
毛片不卡电影网_毛片不卡免费看_毛片不卡视频